MK-8036 Low Zinc Antiwear Hydraulic Oil Additive Package
Product Introduction
Prepared by many kinds of additives such as extreme pressure anti-wear agents, antioxidants and corrosion inhibitors etc.
Used to blend, high-pressure anti wear hydraulic oil with low Zinc.
Stable quality of excellent extreme pressure anti-wear property and thermal oxidation stability.The oil replacement intervals are significant extended.
Recommended Dosage
0.6-0.8% (Need add anti-foam agent separately)
Hydraulic Oil Additive Package Typical data
Standard Compliance
| Item | Typical data | Test method |
| Kinematic viscosity，40℃，mm2/s | 42.36 | GB/T 265 |
| Density，20℃，g/cm3 | 0.9905 | GB/T 1884 |
| Flash point (opening)，℃ | 126 | GB/T 3536 |
| Element content,m% | ||
| Zinc content，% | 2.86 | SH/T 0226 |
| Sulphur content，% | 4.90 | GB/T 17040 |
| Phosphorus content，% | 3.57 | SH/T 0296 |
Packing and Storage
Packaging: Net weight: 200kg/drum. The maximum temperature should not exceed 60 ℃ for the storage, handling of the product and preparation of oil; for long-term storage, the maximum temperature should not exceed 45 ℃. This product is not flammable, explosive. No special preventative measure is required during use, but general preventive measures in handling of chemicals shall be followed. If the oil splashes onto skin, detergent, soap and water can be used to wash it away thoroughly.
