MK-650
MK-650 - Image 2
MK-650 - Image 3
MK-650 - Image 4
,

Product Introduction
Antioxidant and Cleaning Properties: After PIB undergoes high-temperature decomposition, it generates free radical monomers, which reduce carbon deposits and the formation of paint films. It is particularly suitable for two-stroke engine oil, air compressor oil, and cutting fluids.
Specification
inspection item
Product typical value
Method
MK-2400
Appearance
Transparent
Visual
MnMolecular Weigh
2483
GB/T21863
Viscosity(100°C),mm2/s
5100±150
ASTM D445
(HAZEN,Pt-Co) Color
≤45
ASTMD1209
(°C)Flash Point (Open Cup)
≥240
GB/T 3536
Wt-ppmWater (Karl Fischer)

≤50
ASTM D6304
(20°C, kg/m)Density
900±20
GB/T 1884
Product Application
Antioxidant and Cleaning Properties: After PIB undergoes high-temperature decomposition, it generates free radical monomers, which reduce carbon deposits and the formation of paint films. It is particularly suitable for two-stroke engine oil, air compressor oil, and cutting fluids.
Packaging Standards
Net weight of the product: 180kg per barrel, 200L standard barrel.
Product Storage and Transportation
When storing, loading and unloading, as well as when blending this product, refer to SH/T0164. The maximum temperature should not exceed 75 ℃; if stored for a long time, the maximum temperature should not exceed 45 ℃. This product is non-flammable, non-explosive and non-corrosive. In terms of safety, environmental protection and usage, it is the same as ordinary petroleum products and does not require special protection.

 

Product Introduction
VI improver–OCP Viscosity improvers MK-650 is a 24 SSI (30 cycle Orbahn) non-dispersant olefin copolymer viscosity modifier.
To be used with suitable base stocks to prepare gasoline oils.
Specification
Project
Test Method:
Value:
Typical Polymer:
ASTM D 297
0.87
Product Density, g/cc
ASTM D 5667
0.5maximum7maximum
Ash Content, mass%
ASTM E313
7maximum7maximum
Yellowness Index
ASTM 6022
≤24
Permanent.Shear StabilityIndex, %
ASTM D 445
900
KinematicViscosity@100℃,cst
ASTMD 297
0.87
Ethylene Propylene Copolymer (EPM / OCP) CAS 9010-79-1 Viscosity Modifier
Handing&precautions
VI improver
These are typical properties only and are not to be regarded as sales specifications.
Pellets may become partially massed during storage.
Based on 10% polymer in base oil 150N
The quality of polymer products may be affected by exposure to artificial or natural light. This product should be stored indoors in its original packaging and out of direct sunlight.
Concentrated polymer solutions in oil should be stored at no greater than 70° C andhandled at no greater than 120° C. Concentrate solutions may form a gel at temperatures less than 25° C. If the gel is eliminated by reheating the concentrated solution to 65°C, it will have no impact on the performance of the final formula.

 

please click here to contact us.

You can follow our other accounts to learn about our products more conveniently.

You may also like…

Related products